Supported Metrics
| Native Type | Metric Names | Display Name | Metric Label | Unit | Version | Description | Metric Group |
|---|---|---|---|---|---|---|---|
| HPE OneView Resource | hpe_oneview_resource_alert_statistics | HPE OneView Resource Alert Statistics | 1.0.0 | HPE OneView Resource Alert Statistics. | |||
| hpe_oneview_resource_APIStats | HPE OneView Resource API Statistics | Usage | 1.0.0 | HPE OneView Resource Alert Statistics. | |||
| hpe_oneview_resource_CpuSpeed | HPE Oneview Resource CPU Speed | Performance | Hz | 2.0.0 | CPU clock speed of the appliance. | oneViewCpuSpeed | |
| hpe_oneview_resource_LanDataTransferRate | HPE Oneview Resource Lan Data Transfer Rate | Performance | MBps | 2.0.0 | Lan Data transfer rate | oneViewLanStats | |
| hpe_oneview_resource_ActiveUpTime | HPE Oneview Resource Active Uptime | m | 2.0.0 | Uptime of the active appliance. | uptime | ||
| hpe_oneview_resource_StandByUpTime | HPE Oneview Resource Standby Uptime | m | 2.0.0 | Uptime of the standby appliance. | uptime | ||
| hpe_oneview_resource_ControllerState | HPE Oneview Resource Controller State | Availability | 2.0.0 | The current state of the appliance. Possible values are - CONFIGURATION_ERROR(0), ERROR(1), FACTORY_RESET(2),FAILOVER(3),INCOMPATIBLE_MODEL_ERROR(4), NETWORK_ERROR(5),RESTORE(6), RESTORE_NO_RESET_ERROR(7),STOPPED(8),UPGRADE(9),STARTING(10),OK(11) | oneViewControllerState | ||
| HPE OneView Enclosure | hpe_oneview_enclosure_HealthStatus | HPE OneView Enclosure Health Status | Availability | 1.0.0 | Overall health status of the crossbar. Possible values are: OK - 0, Disabled - 1, Warning - 2, Critical -3 , Unknown - 4. | enclosureStatus | |
| hpe_oneview_enclosure_AmbientTemperature | HPE OneView Enclosure Ambient Temperature | Thermal | Celsius | 1.0.0 | Inlet air temperature in degrees Celsius during this sample interval. | enclosureStats | |
| hpe_oneview_enclosure_AvgPower | HPE OneView Enclosure Avg Power | Power | Watts | 1.0.0 | Average power consumption in Watts during this sample interval. | enclosureStats | |
| hpe_oneview_enclosure_DeratedCapacity | HPE OneView Enclosure Derated Capacity | Usage | Watts | 1.0.0 | Enclosure dynamic power cap derated capacity setting in Watts during this sample interval. | enclosureStats | |
| hpe_oneview_enclosure_PeakPower | HPE OneView Enclosure Peak Power | Power | Watts | 1.0.0 | Peak power consumption in Watts during this sample interval. | enclosureStats | |
| hpe_oneview_enclosure_PowerCap | HPE OneView Enclosure PowerCap | Power | Watts | 1.0.0 | Dynamic power cap setting on the server hardware in Watts during this sample interval. | enclosureStats | |
| hpe_oneview_enclosure_RatedCapacity | HPE OneView Enclosure Rated Capacity | USage | Watts | 1.0.0 | Enclosure dynamic power cap rated capacity setting in Watts during this sample interval. | enclosureStats | |
| HPE OneView Enclosure Interconnect | hpe_oneview_interconnectbay_ChangeState | HPE OneView InterconnectBay Change State | 2.0.0 | The change state of the interconnect bay. Possible values are: None - 0,Insert - 1, ProcessingInsert - 2,Remove - 3 | interconnectState | ||
| hpe_oneview_interconnectbay_CPUUtilization | HPE OneView InterconnectBay CPU Utilization | Usage | % | 2.0.0 | Interconnect Bay CPU Utilization | interconnectCpuUtilization | |
| hpe_oneview_interconnectbay_Memory | HPE OneView InterconnectBay Memory | MB | 2.0.0 | Interconnect Bay Memory | interconnectMemory | ||
| hpe_oneview_interconnectbay_Temperature | HPE OneView InterconnectBay Temperature | Thermal | F | 2.0.0 | Interconnect Bay Temperature | interconnectStats | |
| hpe_oneview_interconnectbay_PowerAverageWatts | HPE OneView InterconnectBay Power Average Watts | Usage | W | 2.0.0 | Interconnect Bay Power Average Watts | interconnectStats | |
| hpe_oneview_interconnectbay_PowerPeakWatts | HPE OneView InterconnectBay Power Peak Watts | Usage | W | 2.0.0 | Interconnect Bay Power Peak Watts. | interconnectStats | |
| hpe_oneview_interconnectbay_PowerMinimumWatts | HPE OneView InterconnectBay Power Minumum Watts | Usage | W | 2.0.0 | Interconnect Bay Power Minumum Watts. | interconnectStats | |
| hpe_oneview_interconnectbay_PowerAllocatedWatts | HPE OneView InterconnectBay Power Allocated Watts | Usage | W | 2.0.0 | Interconnect Bay Power Allocated Watts. | interconnectStats | |
| hpe_oneview_interconnectbay_PortInDiscards | HPE OneView InterconnectBay Port In Discards | Performance | count | 2.0.0 | Port statistics IF in discards. | interconnectPortStats | |
| hpe_oneview_interconnectbay_PortOutDiscards | HPE OneView InterconnectBay Port Out Discards | count | 2.0.0 | Port statistics IF out discards. | interconnectPortStats | ||
| hpe_oneview_interconnectbay_PortInErrors | HPE OneView InterconnectBay Port In Errors | Performance | count | 2.0.0 | Port statistics IF in errors | interconnectPortStats | |
| hpe_oneview_interconnectbay_PortOutErrors | HPE OneView InterconnectBay Port Out Errors | Performance | count | 2.0.0 | Port statistics IF out errors | interconnectPortStats | |
| hpe_oneview_interconnectbay_CrcAlignErrors | HPE OneView InterconnectBay CRC Align Errors | Performance | count | 2.0.0 | Port statistics CRC align errors | interconnectStats | |
| hpe_oneview_interconnectbay_CPUUsage | HPE OneView InterconnectBay CPU Usage | Usage | % | 2.0.0 | The CPU usage statistic for interconnect module | interconnectCpuUtilization | |
| hpe_oneview_interconnectbay_MemoryUsage | HPE OneView InterconnectBay Memory Usage | Usage | % | 2.0.0 | The memory usage statistic for interconnect module | interconnectMemoryUsage | |
| hpe_oneview_interconnectbay_PortStatus | HPE OneView InterconnectBay Port Status | Availability | 3.0.0 | Port status. Possible values are - Linked :0, Unknown :1, Unlinked :2 | interconnectPortState | ||
| hpe_oneview_interconnectbay_PortHealthStatus | HPE OneView InterconnectBay Port Health Status | Availability | 3.0.0 | Port health status. Possible values are - Disabled(0), Error(1), Normal(2), Warning(3) | interconnectPortState | ||
| hpe_oneview_interconnectbay_PortOverallHealthStatus | HPE OneView InterconnectBay Port Overall Health Status | Availability | 3.0.0 | Overall health status of port resource. Possible values are: OK(0), Disabled(1), Warning(2), Critical(3), Unknown(4) | interconnectPortState | ||
| HPE OneView Enclosure PowerSupply | hpe_oneview_powersupplybay_Status | HPE OneView PowersupplyBay Status | Availability | 1.0.0 | Overall health status of the power supply. Possible values are: OK - 0, Disabled - 1, Warning - 2, Critical -3 , Unknown - 4. | deviceStatus | |
| hpe_oneview_powersupplybay_DevicePresence | HPE OneView PowersupplyBay Device Presence | Availability | 1.0.0 | Indicates whether a power supply is present. Possible values are: Absent - 0, PresenceNoOp - 1, PresenceUnknown - 2, Subsumed - 3, Present - 4. | deviceStatus | ||
| HPE OneView Enclosure Fan | hpe_oneview_fanbay_DevicePresence | HPE OneView FanBay Device Presence | Availability | 1.0.0 | Indicates whether a fan is present. Possible values are: Absent - 0, PresenceNoOp - 1, PresenceUnknown - 2, Subsumed - 3, Present - 4. | deviceStatus | |
| hpe_oneview_fanbay_State | HPE OneView FanBay State | Availability | 1.0.0 | Current state of the fan. Possible values are: Degraded - 0, Failed - 1, Misplaced - 2, Missing - 3, OK - 4. | deviceStatus | ||
| hpe_oneview_fanbay_Status | HPE OneView FanBay Status | Availability | 1.0.0 | Overall health status of the fan. Possible values are: OK - 0, Disabled - 1, Warning - 2, Critical - 3 , Unknown - 4. | deviceStatus | ||
| HPE OneView Enclosure ManagerBay | hpe_oneview_managerbay_Role | HPE OneView ManagerBay Role | 1.0.0 | The current role of the manager. Possible values are: Active - 0, Standby - 1, Transition - 2, Unknown - 3. | deviceStatus | ||
| hpe_oneview_managerbay_PowerState | HPE OneView ManagerBay PowerState | Power | 1.0.0 | The power state of the manager bay. Possible values are: Unknown - 1. | deviceStatus | ||
| hpe_oneview_managerbay_State | HPE OneView Managerbay State | Availability | 1.0.0 | The state of the manager. Possible values are : Offline - 0, Online - 1. | deviceStatus | ||
| HPE OneView Appliance | hpe_oneview_appliance_Status | HPE OneView Appliance Status | Availability | 2.0.0 | The hardware status of the appliance. Possible values are OK(0), Disabled(1), Warning(2), Critical(3) , Unknown(4) | oneViewApplianceState | |
| hpe_oneview_appliance_State | HPE OneView Appliance State | Availability | 2.0.0 | Current state of the resource. Possible values are Unknown(0), Removing(1), Adding(2), Synchronizing(3), Ok(4) | oneViewApplianceState | ||
| hpe_oneview_appliance_PoweredOn | HPE OneView Appliance PoweredOn | Power | 2.0.0 | True(1) if the appliance is powered on; false(0) otherwise. | oneViewApplianceState | ||
| HPE OneView Server Hardware | hpe_oneview_serverhw_PowerState | HPE OneView Server hardware Power State | Availability | 1.0.0 | Current power state of the physical server hardware. Possible values are: Unknown - 5, On - 0, Off - 1, PoweringOn - 2, PoweringOff - 3, Resetting - 4. | hwPowerState | |
| hpe_oneview_serverhw_HealthStatus | HPE OneView Server hardware Health Status | Availability | 1.0.0 | Overall health status of the resource. Possible values are: OK - 0, Disabled - 1, Warning - 2, Critical -3, Unknown - 4. | hwStatus | ||
| hpe_oneview_serverhw_AmbientTemperature | HPE OneView Server hardware Ambient Temperature | Usage | Celsius | 1.0.0 | Inlet air temperature in degrees Celsius. | hwStats | |
| hpe_oneview_serverhw_AvgPower | HPE OneView Server hardware Avg Power | Usage | Watts | 1.0.0 | Average power consumption in Watts. | hwStats | |
| hpe_oneview_serverhw_PeakPower | HPE OneView Server hardware Peak Power | Usage | Watts | 1.0.0 | Peak power consumption in Watts. | hwStats | |
| hpe_oneview_serverhw_PowerCap | HPE OneView Server hardware Power cap | Usage | Watts | 1.0.0 | Dynamic power cap setting on the server hardware in Watts. | hwStats | |
| hpe_oneview_serverhw_CpuAvgFrequency | HPE OneView Server hardware CpuAvgFrequency | Usage | MHz | 1.0.0 | Average CPU frequency in Mhz. | hwCpuStats | |
| hpe_oneview_serverhw_CpuUtilization | HPE OneView Server hardware CpuUtillization | Usage | % | 1.0.0 | CPU utilization of all CPUs in percent. | hwCpuUtilization | |
| HPE OneView ServerHw Device | hpe_oneview_serverhw_device_HealthStatus | HPE OneView ServerHw Device Health Status | Availability | 4.0.0 | Returns the health status of the Device. Possible states are CRITICAL(0), OK(1), WARNING(2). | deviceStatus | |
| hpe_oneview_serverhw_device_State | HPE OneView ServerHw Device State | Availability | 4.0.0 | Returns the availability state of the Device. Possible states are ABSENT(0), DEFERRING(1), DISABLED(2), ENABLED(3), INTEST(4), QUALIFIED(5), QUIESCED(6), STANDBYOFFLINE(7), STANDBYSPARE(8), STARTING(9), UNAVAILABLEOFFLINE(10), UPDATING(11). | deviceStatus | ||
| HPE OneView Storage System | hpe_oneview_storagesystem_AllocatedCapacity | HPE OneView Storagesysten Allocated Capacity | Usage | Bytes | 1.0.0 | Allocated capacity of the storage system in bytes. | storageSystemCapacity |
| hpe_oneview_storagesystem_TotalCapacity | HPE OneView Storagesystem Total Capacity | Usage | Bytes | 1.0.0 | Total capacity of the storage system in bytes. | storageSystemCapacity | |
| hpe_oneview_storagesystem_FreeCapacity | HPE OneView Storagesystem Free Capacity | Usage | Bytes | 1.0.0 | Free capacity of the storage system in bytes. | storageSystemCapacity | |
| hpe_oneview_storagesystem_State | HPE OneView Storagesystem State | Availability | 1.0.0 | Current state of the resource. Possible values are: AddFailed - 0, Adding - 1, Configured - 2, Connected - 3, Copying - 4, CreateFailed - 5, Creating - 6, DeleteFailed - 7, Deleting - 8, Discovered - 9, Managed - 10, Normal - 11, UpdateFailed - 12, Updating - 13. | storageSystemState | ||
| hpe_oneview_storagesystem_HealthStatus | HPE OneView Storagesystem HealthStatus | Availability | 1.0.0 | Overall health status of the Storage system resource. Possible values are: OK - 0, Unknown - 1, Disabled - 2, Warning - 3, Critical -4. | storageSystemState | ||
| HPE OneView Storage System Port | hpe_oneview_storagesystemport_ConnectionState | HPE OneView Storagesystem port Connection State | Availability | 1.0.0 | Indicates the connection state of the port as reported by the storage system. Possible values are: Connected - 0, Failed -1, NotConnected - 2, Offline -3, Unknown - 4. | portState | |
| hpe_oneview_storagesystemport_HealthStatus | HPE OneView Storagesystem port healthStatus | Availability | 1.0.0 | Overall health status of the port. Possible values are: OK - 0, Disabled -1, Unknown - 2, Warning -3, Critical - 4. | portState | ||
| HPE OneView Storage Pool | hpe_oneview_storagepool_State | HPE OneView Storagepool State | Availability | 1.0.0 | Current state of the storage pool. Possible values are: AddFailed - 0, Adding - 1, Configured - 2,Connected - 3,Copying - 4, CreateFailed - 5, Creating - 6, DeleteFailed - 7, Deleting - 8,Discovered - 9, Managed - 10, Normal -11, UpdateFailed - 12, Updating - 13. | poolState | |
| hpe_oneview_storagepool_HealthStatus | HPE OneView Storagepool HealthStatus | Availability | 1.0.0 | Overall health status of the storage pool. OK - 0, Disabled - 1, Unknown - 2, Warning - 3, Critical - 4. | poolState | ||
| hpe_oneview_storagepool_FreeCapacity | HPE OneView Storagepool Free Capacity | Usage | Bytes | 1.0.0 | Free capacity available from the storage pool in bytes. | poolCapacity | |
| hpe_oneview_storagepool_TotalCapacity | HPE OneView Storagepool Total Capacity | Usage | Bytes | 1.0.0 | Total capacity of the storage pool in bytes. | poolCapacity | |
| hpe_oneview_storagepool_SubscribedCapacity | HPE OneView Storagepool Subscribed Capacity | Usage | Bytes | 1.0.0 | Storage pool subscribed capacity in Bytes. | poolCapacity | |
| hpe_oneview_storagepool_TotalAllocatedCapacity | HPE OneView Storagepool Total Allocated Capacity | Usage | Bytes | 1.0.0 | The total allocated capacity of the pool in bytes.. | poolCapacity | |
| hpe_oneview_storagepool_VolumeAllocatedCapacity | HPE OneView Storagepool Volume Allocated Capacity | Usage | Bytes | 1.0.0 | The pool capacity allocated to volumes in bytes. | poolVolumeCapacity | |
| hpe_oneview_storagepool_SnapshotAllocatedCapacity | HPE OneView Storagepool Snapshot Allocated Capacity | Usage | Bytes | 1.0.0 | The pool capacity allocated to snapshots in bytes. | poolSnapshotCapacity | |
| HPE OneView Server Profile | hpe_oneview_serverprofile_Status | HPE OneView Server Profile Status | Availability | 3.0.0 | Overall health status of this server profile. Possible values are : OK(0), Disabled(1), Warning(2), Critical(3) , Unknown(4). | serverProfileState | |
| hpe_oneview_serverprofile_State | HPE OneView Server Profile State | Availability | 3.0.0 | Current state of the server profile.Possible values are : Normal(0), Creating(1) , CreateFailed(2), Updating(3), UpdateFailed(4), Deleting(5), DeleteFailed(6) | serverProfileState | ||
| HPE OneView Drive Enclosure | hpe_oneview_driveEnclosure_PowerState | HPE OneView Drive Enclosure Power State | Availability | 3.0.0 | Current power state of drive enclosure. Possible values are: Off(0), On(1), PoweringOff(2), PoweringOn(3) , Unknown(4) | enclosureStats | |
| hpe_oneview_driveEnclosure_Status | HPE OneView Drive Enclosure Status | Availability | 3.0.0 | Overall health status of the resource. Possible values are: OK(0), Disabled(1), Warning(2), Critical(3) , Unknown(4) | enclosureStatus | ||
| HPE OneView Drive Bay | hpe_oneview_driveBay_Status | HPE OneView Drive Bay Status | Availability | 3.0.0 | Overall health status of the resource. Possible values are: OK(0), Disabled(1), Warning(2), Critical(3) , Unknown(4) | deviceStatus | |
| HPE OneView Drive | hpe_oneview_drive_Status | HPE OneView Drive Status | Availability | 3.0.0 | Overall health status of the resource. Possible values are: OK(0), Disabled(1), Warning(2), Critical(3) , Unknown(4) | diskState | |
| HPE OneView Drive Enclosure IOAdapter | hpe_oneview_driveEnclosure_IoAdapter_Status | HPE OneView Drive Enclosure IoAdapter Status | Availability | 3.0.0 | Overall health status of the resource. Possible values are: OK(0), Disabled(1), Warning(2), Critical(3) , Unknown(4) | enclosureIoAdapterState | |
| hpe_oneview_driveEnclosure_IoAdapter_port_Status | HPE OneView Drive Enclosure IoAdapter Port Status | Availability | 3.0.0 | Overall health status of the resource. Possible values are: OK(0), Disabled(1), Warning(2), Critical(3) , Unknown(4) | enclosureIoAdapterState | ||
| HPE OneView Logical JBOD Attachment | hpe_oneview_logicalJBODAttachment_Status | HPE OneView Logical JBOD Attachment Status | Availability | 3.0.0 | Overall health status of the resource. Possible values are: OK(0), Disabled(1), Warning(2), Critical(3) , Unknown(4) | jBODStatus | |
| HPE OneView Logical JBOD | hpe_oneview_logicalJBOD_Status | HPE OneView Logical JBOD Status | Availability | 3.0.0 | Overall health status of the resource. Possible values are: OK(0), Disabled(1), Warning(2), Critical(3) , Unknown(4) | jBODStatus | |
| HPE OneView SAN | hpe_oneview_san_State | HPE OneView SAN State | Availability | 3.0.0 | State of the SAN resource. Possible values are: ConfigurationPending(0), Configured(1), Configuring(2), Deleting(3), Discovered(4), Managed(5), Removing(6) | sanState | |
| hpe_oneview_san_Status | HPE OneView SAN Status | Availability | 3.0.0 | Status of the resource. Possible values are: OK(0), Disabled(1), Warning(2), Critical(3) , Unknown(4) | sanState | ||
| HPE OneView SAN Manager | hpe_oneview_sanManager_State | HPE OneView SAN Manager State | Availability | 3.0.0 | State of the SAN manager resource. Possible values are: ConfigurationPending(0), Configured(1), Configuring(2), Deleting(3), Discovered(4), Managed(5), Removing(6) | sanManagerState | |
| hpe_oneview_sanManager_Status | HPE OneView San Manager Status | Availability | 3.0.0 | Status of the resource. Possible values are: OK(0), Disabled(1), Warning(2), Critical(3) , Unknown(4) | sanManagerState |
Default Monitoring Configurations
HPE OneView has default Global Device Management Policies, Global Templates, Global Monitors and Global Metrics in OpsRamp. You can customize these default monitoring configurations as per your business use cases by cloning respective Global Templates and Global Device Management Policies. We recommend doing this activity before installing the application to avoid noise alerts and data.
Default Global Device Management Policies
You can find the Device Management Policy for each Native Type at Setup > Resources > Device Management Policies. Search with suggested name in global scope. Each Device Management Policy follows below naming convention:
{appName nativeType - version}Ex: hpe-oneview HPE OneView Resource - 1 (i.e, appName = hpe-oneview, nativeType = HPE OneView Resource, version = 1)
Default Global Templates
You can find the Global Templates for each Native Type at Setup > Monitoring > Templates. Search with suggested names in global scope. Each template follows below naming convention:
{appName nativeType 'Template' - version}Ex: hpe-oneview HPE OneView Resource Template - 1 (i.e, appName = hpe-oneview, nativeType = HPE OneView Resource, version = 1)
Default Global Monitors
You can find the Global Monitors for each Native Type at Setup > Monitoring > Monitors. Search with suggested name in global scope. Each Monitors follows below naming convention:
{monitorKey appName nativeType - version}Ex: HPE OneView Resource Monitor hpe-oneview HPE OneView Resource 1 (i.e, monitorKey = HPE OneView Resource Monitor, appName = hpe-oneview, nativeType = HPE OneView Resource, version = 1)